Wiki
This Wiki article contains some basic settings and tips for using the large format FDM printers (Carrot and Monstarr). These printers require another training class after completing the normal FDM printer training regarding our smaller prusa machines.
Settings
Both machines use Orca Slicer, available on the Slicing Computer. Note that the start gcode command that the printers accept is START PRINT not PRINT START so your start gcode in orca slicer will need to be renamed as of now.
Carrot
Available at Carrot.inside.denhac.org
Default Nozzle Diameter: 0.8mm
Build Volume: 600mm X 600mm X 660mm
Max Printing Acceleration: 5m/s/s
If you get the error “Toolhead stopped below model range”, simply press the calibrate macro in the moonraker UI.
Table invalid link error is a bed mesh failure.
Monstarr
Monstarr.inside.denhac.org
Default Nozzle Diameter: 0.5mm
Build Volume: 390mm X 390mm X 600mm
Max Printing Acceleration: 10m/s/s