PrimeWeld TIG225X

Location

Metal Working Area

History

Ownership

Denhac

Specs

1. Make: PrimeWeld
2. Model: TIG225x
3. Description/Purpose: Two metals bits become one.
4. Weight: ~ 50 lbs

Accessories

• Lanthanated and pure tungsten available in 3/32. Lanthanted also available in 1/16. Mild steel and aluminum filler wire available in 3/32 and 1/16.
• Multiple sizes of gas cup.
• Foot pedal for TIG operation
• Stick electrodes and clamp available.
• Use only 100% argon gas.

Pending Repairs

• None

Usage/Guidelines

Power-up

1. Apply PPE.
2. Plug in torch and work clamp into appropriate terminals for your operation. Plug in foot pedal for TIG.
3. For TIG, open the gas cylinder valve slowly and completely until the valve stops at maximum “open.” Ensure at least 100PSI in cylinder.
4. Power on using the blue switch on the back of the chassis. For TIG, set CFH on flow regulator to (rule of thumb) 2x the cup size # on your torch.
5. Install sharp and clean tungsten, attach work clamp, knob in the correct settings, go.

 

Power-down

1. Power off, unplug.
2. Close the dang cylinder. Gas is money.
3. Clean and sharpen all the tungsten you used.
4. Neatly store cables and relevant welding tools on cart.
5. Tuck TIG away and sing it a lullaby.

Files/Links

User Manual